Superconductivity, Part 9: Hydrides Under Extreme Pressure

Hydrogen-rich materials pushed reported superconducting temperatures to 203 K and around 250 K. Those results required extreme pressure. This article explains the theory, experiments, and pressure conditions behind them.

1968 — Why Did Scientists Turn to Hydrogen?

Hydrogen is the lightest element in the periodic table. That simple fact makes it especially interesting in superconductivity research. In 1968, physicist Neil W. Ashcroft proposed that metallic hydrogen could potentially become a superconductor with a very high critical temperature.[1]

The idea was closely connected to atomic mass and lattice vibrations. In conventional superconductivity, interactions between electrons and vibrations of the crystal lattice play an important role. Because hydrogen is so light, its atoms can vibrate at very high frequencies.

Those high-frequency vibrations can help support superconductivity at higher temperatures.

But there was a major problem.

Hydrogen is not metallic under ordinary conditions. Turning hydrogen into a metallic state requires enormous pressure. That difficulty led researchers to explore not only pure hydrogen, but also compounds in which hydrogen is combined with other elements.

These materials are known as hydrides. Some hydrogen-rich hydrides can become metallic under high pressure and, under the right conditions, enter a superconducting state. This opened a new route toward much higher critical temperatures.


2015 — Superconductivity at 203 K

A major breakthrough came in 2015. Alexander Drozdov, Mikhail Eremets, and their colleagues reported superconductivity at about 203 K in a sulfur-hydrogen system under high pressure.[2] Compared with mercury-based cuprates, which had reached about 133 K at ambient pressure, this was a dramatic increase.

The high-temperature superconducting phase was associated with hydrogen-rich material formed under pressure, particularly H₃S. Researchers observed the disappearance of electrical resistance and changes in the critical temperature under an applied magnetic field. The result showed that hydrogen-rich materials could support superconductivity at temperatures far beyond the range achieved by earlier superconductors.

But there was an important limitation. The superconducting state required pressures of roughly 150 GPa. That is about 1.5 million times atmospheric pressure.

So while researchers had made a major leap in critical temperature, the material could reach that state only under extraordinarily high pressure. A new temperature record had been achieved, but extreme pressure had become a major condition for reaching it.


Diamond Anvil Cells and Extreme Pressure

Experiments at these pressures are made possible by a device called a diamond anvil cell. A tiny sample is placed between the tips of two diamonds, and force is applied over an extremely small area. Because the contact area is so small, the device can generate pressures of hundreds of gigapascals.

This allows researchers to study materials under conditions similar to those found deep inside planets. Many important discoveries involving high-pressure hydride superconductors were made possible by this technique. But there is a major practical limitation.

The sample itself is extremely small, and the high-pressure region exists only within a tightly confined space. Demonstrating superconductivity inside a diamond anvil cell is very different from producing a material that can be manufactured as a wire or used in an electronic device. Hydride superconductors demonstrated that much higher critical temperatures were possible.

But practical applications would require researchers to reduce the enormous pressure needed to maintain those states.


2019 — Reaching 250 K

Another major result followed in 2019. A research team including Alexander Drozdov and Mikhail Eremets reported superconductivity at around 250 K in a lanthanum-hydrogen system under high pressure.[3] One of the key materials associated with this work is LaH₁₀, a lanthanum hydride.

Under extreme pressure, hydrogen atoms form unusual structures around lanthanum atoms. Researchers observed a transition to zero electrical resistance and studied how the critical temperature changed under magnetic fields. The superconducting state appeared at pressures of roughly 170 GPa.

The progress becomes much clearer when we compare several important milestones.

1911 — Mercury: about 4 K

1993 — Mercury-based cuprate: about 133 K at ambient pressure

2015 — Sulfur hydride: about 203 K under extreme pressure

2019 — Lanthanum hydride: about 250 K under extreme pressure

From the first discovery of superconductivity to the 250 K hydride result, the critical temperature had increased by roughly 246 K. This was an extraordinary shift from the temperature range in which superconductivity was first discovered. And 250 K is no longer a temperature close to absolute zero. It is roughly −9°F, a temperature that can occur during a very cold winter.

That makes the progress easier to appreciate from an everyday point of view.

But the same limitation remained.

The highest critical temperatures still required enormous pressure.


Hydrides and the Return of Conventional Superconducting Theory

Hydride superconductors are also important because of their relationship to conventional superconducting theory. Copper-oxide high-temperature superconductors cannot be fully explained by the traditional BCS framework alone. Hydrides such as H₃S and LaH₁₀, however, are understood largely through strong interactions between electrons and lattice vibrations.

That brings the story back to some of the basic ideas behind BCS theory, introduced in 1957. For detailed calculations of these materials, researchers use more advanced approaches such as Migdal-Eliashberg theory. Still, the basic connection remains important.

The light mass of hydrogen produces very high-frequency lattice vibrations, and those vibrations can contribute to unusually high critical temperatures. In that sense, the hydride results connect back to the possibility proposed by Neil W. Ashcroft in 1968.

An idea that had existed for decades became experimentally important as materials science and high-pressure technology continued to improve.


Temperature Alone Is Not Enough

The pressure requirement is the central qualification in these hydride results. It is part of the experiment, rather than a small practical detail that can be dropped from a headline. A transition observed in a compressed sample does not establish that the same phase will remain superconducting after decompression.

Reading the Hydride Results Without Losing the Pressure Condition

Research recordTemperature and pressureWhat follows from the result
Sulfur-hydride system, 2015203 K at approximately 155 GPa. [2]A high-temperature superconducting transition under extreme compression.
Lanthanum hydride, 2019Around 250 K at approximately 170 GPa. [3]A still higher transition temperature under high pressure; not ordinary-pressure operation.

For scale, 1 GPa is one billion pascals. These conditions are generated in specialized high-pressure equipment. The temperature and pressure must be reported together to describe what was achieved.

The distinction from the cuprate records in Part 8 is experimental condition, not just temperature. Keeping that distinction visible prevents a laboratory result from being read as an immediately usable room-temperature technology.

References

[1] N. W. Ashcroft, “Metallic Hydrogen: A High-Temperature Superconductor?”, Physical Review Letters, 1968.

[2] A. P. Drozdov, M. I. Eremets, I. A. Troyan, V. Ksenofontov, and S. I. Shylin, “Conventional superconductivity at 203 kelvin at high pressures in the sulfur hydride system,” Nature, 2015.

[3] A. P. Drozdov, P. P. Kong, V. S. Minkov et al., “Superconductivity at 250 K in lanthanum hydride under high pressures,” Nature, 2019.

Comments

Popular posts from this blog

LK-99, Part 8: Patents and Applications

Superconductivity, Part 3: How Flux Pinning Works

Superconductivity, Part 1: The 1911 Discovery