Superconductivity, Part 8: The Temperature Records

“High-temperature” superconductors still need substantial cooling. This timeline compares key temperature records and keeps ambient-pressure results separate from pressure-enhanced results.

1911 — It Began at About 4 K

The history of superconductivity began in 1911, when Heike Kamerlingh Onnes discovered the phenomenon while studying mercury at extremely low temperatures.
When mercury was cooled to about 4.1 K, or roughly −452°F, its electrical resistance suddenly disappeared.
This was the first experimental observation of superconductivity.
But 4 K is extraordinarily cold, only a few degrees above absolute zero. Maintaining that temperature requires cryogenic cooling, typically involving liquid helium.
So one of the most important questions in superconductivity research soon became obvious:
“Can superconductivity exist at higher temperatures?”
For decades, researchers searched for new materials that could answer that question.

1987 — Crossing the Liquid-Nitrogen Threshold

A major breakthrough began in 1986, when J. Georg Bednorz and K. Alex Müller discovered superconductivity in a copper-oxide material at a temperature far higher than the previous conventional records.

Then, in 1987, a research team including M. K. Wu and C. W. Chu reported superconductivity in a Y-Ba-Cu-O material at around 93 K.[1]

That corresponds to about −292°F.

That is still extremely cold.

But the important point was that 93 K is higher than the boiling point of liquid nitrogen, which is about 77 K, or roughly −321°F. This changed the practical meaning of high-temperature superconductivity. Liquid helium is expensive and requires demanding cryogenic systems. Liquid nitrogen is much cheaper, easier to obtain, and easier to handle.

So crossing the 77 K threshold was not simply another temperature record. It meant that superconductors had taken an important step toward becoming easier to use outside highly specialized laboratories. From that point on, the race toward higher critical temperatures accelerated dramatically.


The 100 K Barrier Was Soon Broken

After 1987, researchers began exploring entirely new families of copper-oxide superconductors. They changed the elements used in the compounds, altered chemical ratios, modified crystal structures, and experimented with different arrangements of copper and oxygen layers.

The goal was straightforward:

Find a material that remains superconducting at an even higher temperature.

The results came quickly.

Bismuth-based copper oxides showed superconductivity above 100 K, while thallium-based superconductors later reached critical temperatures of around 125–127 K. Only a few years earlier, a critical temperature near 30 K had seemed extraordinary. Now scientists had already moved beyond 100 K.

Looking at how quickly those records were rising, it is easy to understand why people at the time began to wonder whether room-temperature superconductivity might be much closer than anyone had expected. Then another important family of materials appeared.

The mercury-based superconductors.


1993 — The Rise of Mercury-Based Superconductors

In 1993, Andreas Schilling, Marco Cantoni, J. D. Guo, and H. R. Ott reported superconductivity above 130 K in the Hg-Ba-Ca-Cu-O system.

Their experiments showed a critical temperature of about 133 K.[2] That corresponds to roughly −220°F. Compared with the earlier thallium-based record of around 125–127 K, the increase may not look dramatic.

But by that point, every additional rise in critical temperature represented another step into a region that had once seemed unreachable. An important material in this family was HgBa₂Ca₂Cu₃O₈+δ, commonly known as Hg-1223. Electrical resistance and magnetic measurements showed superconducting behavior around 133 K.

Once again, the temperature record had moved higher.


Under Pressure, the Temperature Rose Even Further

Mercury-based superconductors revealed another interesting possibility. When researchers applied very high pressure, the critical temperature increased even further.

Also in 1993, a research team led by C. W. Chu reported superconductivity above 150 K in Hg-1223 under high pressure.[3]

That corresponds to roughly −190°F. Compared with the first superconductors discovered near −452°F, this was an enormous improvement.

But it also raised another question:

If extremely high pressure is required to reach that temperature, how practical can the material really be?

Scientists had managed to push the temperature higher, but another obstacle had appeared at the same time. That is one of the recurring patterns in the history of superconductivity. Solving one problem often reveals another.


A Higher Temperature Was Not Enough

Temperature records need a pressure label. A result measured at ordinary pressure and a result measured while a sample is compressed answer different experimental questions. I therefore keep those conditions alongside the temperature rather than combining every result into one unqualified ranking.

From −452°F to −220°F

Illustrated timeline comparing mercury, YBCO, bismuth and thallium cuprates, and mercury-based cuprates, including a separate high-pressure result.

Superconducting Temperature Milestones and Their Pressure Conditions
A visual overview of temperature milestones. Ambient-pressure and pressure-enhanced results are distinguished in the comparison table in this article.
Conceptual timeline illustration; the referenced text and comparison table provide the experimental context.

In 1911, the first superconducting transition was observed at about −452°F. By 1993, mercury-based copper-oxide superconductors had reached about −220°F at ambient pressure. Over roughly eight decades, researchers had raised the superconducting temperature by about 232°F.

That is still far from the temperatures we experience in everyday life. But when we remember where superconductivity began, the scale of the progress becomes much easier to appreciate. Scientists discovered new elements and compounds, explored new crystal structures, and even used pressure as another way to push the limits.

Step by step, superconductivity moved farther away from absolute zero.

A Temperature Record Needs Its Experimental Conditions

Result discussed in this articleReported temperatureHow to compare it
Y–Ba–Cu–O, 1987About 93 K at ambient pressure. [1]A milestone above the liquid-nitrogen boiling point.
Mercury-based cuprate system, 1993About 133 K at ambient pressure. [2]An ordinary-pressure result; the material and composition still matter.
Mercury-based cuprate under pressure, 1993Above 150 K under high pressure. [3]A pressure-enhanced result, which should retain that qualification.

My reading rule is to ask three questions before comparing two numbers: Is the material the same? Was the pressure the same? Was the same transition criterion used? A transition can be described by its onset or by the point at which resistance becomes indistinguishable from zero. Those descriptions should not be silently treated as identical.

References

[1] M. K. Wu et al., “Superconductivity at 93 K in a New Mixed-Phase Y-Ba-Cu-O Compound System at Ambient Pressure,” Physical Review Letters, 1987.

[2] A. Schilling, M. Cantoni, J. D. Guo, and H. R. Ott, “Superconductivity above 130 K in the Hg-Ba-Ca-Cu-O System,” Nature, 1993.

[3] C. W. Chu et al., “Superconductivity above 150 K in HgBa₂Ca₂Cu₃O₈+δ at High Pressures,” Nature, 1993.

Comments

Popular posts from this blog

LK-99, Part 8: Patents and Applications

Superconductivity, Part 3: How Flux Pinning Works

Superconductivity, Part 1: The 1911 Discovery