Superconductivity, Part 10: Uses from MRI to Power Cables
Superconductors already operate in MRI scanners, power cables, particle accelerators, and research devices. Their cooling requirements remain a major engineering constraint. In South Korea, a superconducting power cable was connected to the actual power grid and began commercial operation in 2019.[1]
The superconducting cable was installed along an approximately 1-kilometer section connecting the Singal and Heungdeok substations in Yongin, Gyeonggi Province. Since then, next-generation superconducting cables capable of transmitting larger amounts of electricity have been developed, and more recently, power systems using superconducting technology for AI data centers with enormous electricity demands have also begun to emerge.[2][3] Of course, superconducting cables still require cooling systems to maintain the superconducting state, and the initial infrastructure cost must also be considered.
However, they can transmit large amounts of electricity through relatively compact spaces and can increase transmission capacity without requiring the same scale of expansion as conventional power infrastructure. This advantage may become especially important in densely populated urban areas where building new transmission routes or large substations can be difficult. For that reason, the economics of superconducting cables cannot be judged only by their initial installation cost.
Installation space, transmission capacity, the cost of substations and underground power tunnels, and long-term operating conditions all need to be considered together. Superconducting cables are no longer technologies that exist only as laboratory experiments. They have already been commercially operated in real power grids, and their potential applications are expanding as electricity demand continues to grow.
A Real Superconducting Power Cable
Inside a High-Temperature Superconducting Power Cable
The layered construction of a superconducting power cable, an example of the existing technologies discussed in this article.
Image: LS Cable & System. The original caption identifies an AC 23 kV, 60 MVA HTS cable.
One of the Closest Superconducting Technologies to Us — MRI
One of the most familiar real-world applications of superconductors is MRI (Magnetic Resonance Imaging). Many people have heard of MRI at a hospital, and some have experienced an MRI scan themselves. MRI is a medical imaging technology that uses strong magnetic fields and radio-frequency signals to create detailed images of the inside of the human body.[4]
At the center of an MRI system is a magnet capable of producing a very strong and stable magnetic field. Many MRI machines use superconducting magnets to generate this field. When a very large electric current flows through an ordinary conductor, electrical resistance produces heat.
As the current increases, heat generation and energy loss can also increase. But when a superconductor enters the superconducting state, electrical resistance disappears, allowing large electric currents to generate extremely strong and stable magnetic fields. So when we undergo an MRI scan at a hospital, superconducting technology is already playing an important role inside the machine, even though we cannot see it.
Why Does MRI Need Such a Powerful Magnet?
The human body contains a large amount of water, and water contains hydrogen nuclei. MRI uses the response of these hydrogen nuclei inside a strong magnetic field to obtain signals and then processes those signals to create images of the inside of the body.[4] For this process, it is important not only to create a strong magnetic field but also to maintain a stable and highly uniform magnetic field for long periods of time.
Superconducting magnets are very well suited to creating these conditions. That is why the MRI machines commonly found in hospitals are one of the clearest examples of superconducting technology already being part of everyday life. When I first started learning about superconductors, I found this especially interesting.
It is easy to imagine superconductors as a technology that might be used someday in the distant future. But they are already being used inside medical equipment that examines the human body.
Giant Machines for Studying Tiny Particles — Particle Accelerators
Superconducting magnets are also used in scientific facilities that are far larger than hospital MRI machines. One of the best-known examples is the Large Hadron Collider (LHC) at CERN. The LHC accelerates particles such as protons to extremely high energies and then collides them inside a giant circular accelerator.
A fast-moving particle naturally tends to continue moving in a straight line. To keep the particles traveling around the approximately 27-kilometer circular accelerator, powerful magnets are needed to continuously bend and control their paths. This is where superconducting magnets become essential.
The LHC’s main dipole magnets produce magnetic fields of about 8.3 tesla to control the particle beams, and these magnets rely on superconducting technology.[5] They operate at an extremely low temperature of about 1.9 K.[5] Superconductors are therefore also being used to study a world of particles far too small for us to see directly.
Superconductors Are Also Used in Magnetic Levitation Trains
When people think about superconductors, one image often comes to mind. It is the sight of an object floating above a magnet. Superconducting technology is also used in magnetic levitation transportation.
A representative example is Japan’s SCMAGLEV, or superconducting magnetic levitation train. Superconducting magnets installed on the train interact with coils installed along the guideway to generate magnetic forces that lift and propel the vehicle.[6] In the system developed by JR Central, the train is designed to travel at high speed while levitating about 10 centimeters above the guideway.[6]
Because the train can move without direct wheel-to-rail contact at high speed, the system is well suited to very high-speed transportation. However, one distinction is important. Not every magnetic levitation train uses superconductors.
There are several types of maglev technology, and Japan’s SCMAGLEV is a representative example that uses superconducting magnets.
Giant Superconducting Magnets for Fusion Research
Another field in which superconductors play an extremely important role is nuclear fusion research. To create fusion reactions, matter must be heated until it enters an extremely hot state known as plasma. But plasma at such temperatures cannot simply be allowed to touch the walls of an ordinary container.
For this reason, tokamak-style fusion devices use powerful magnetic fields to confine and control the plasma. The international fusion project ITER uses an enormous superconducting magnet system for this purpose.[7] Its superconducting magnets use materials including niobium-tin (Nb₃Sn) and niobium-titanium (Nb-Ti) and are designed to operate in the superconducting state at around 4 K.
The total mass of ITER’s superconducting magnet system is about 10,000 tonnes.[7] The superconducting property we have repeatedly discussed — the disappearance of electrical resistance — is now being used in one of humanity’s largest efforts to develop fusion energy.
Superconductors Are Inside Quantum Computers Too
Superconductors are not used only in enormous machines.
They are also used in extremely small electronic circuits. One major example is the quantum computer. There are several different approaches to building quantum computers, and one of the important methods uses superconducting qubits.[8]
A qubit is the basic unit used to process information in a quantum computer. A structure known as a Josephson junction plays an important role in superconducting qubits. It consists of two superconductors separated by an extremely thin insulating barrier and makes use of quantum-mechanical effects.[8]
These superconducting circuits also operate at extremely low temperatures.
From enormous fusion machines to quantum circuits smaller than a fingernail,
the range of sizes and technologies in which superconductors are used is much broader than we might expect.
The Cooling Constraint
These applications depend on materials kept below their critical temperatures. Higher operating temperatures could reduce the cooling burden, but current capacity, magnetic-field limits, cost, and reliability still determine which material fits each application.
References
[2] LS Cable & System, “LS Cable & System and LS ELECTRIC Launch the World’s First Superconducting Solution for Internet Data Centers,” 2024.
[3] LS Cable & System, materials on AI data-center power infrastructure and superconducting technology, 2026.
[6] Central Japan Railway Company (JR Central), materials on the Superconducting Maglev System.
[7] ITER Organization, “Superconducting Magnets — ITER Machine Systems.”

Comments
Post a Comment
자유로운 의견 해주세요