LK-99 Patent 4 — The Conductive Ceramic Divisional Application and Re-examination Record

South Korean divisional application 10-2022-0106812 describes an apatite-based ceramic and methods for making it. The published specification sets out a range of compositions. The Korean procedural record shows that the applicant filed for re-examination after a refusal.

1. The Conductive Ceramic Divisional Application

Title of the inventionCeramic Compound Exhibiting Conductive Characteristics at Room Temperature and Atmospheric Pressure, and Method for Manufacturing the Same
Jurisdiction / filing typeRepublic of Korea / divisional application
Applicant / recorded nameQuantum Energy Research Centre, Inc. (QERI)
DateAugust 25, 2022
Republic of Korea application number10-2022-0106812
Publication used for the technical explanationKR20230030551A
Basis of the procedural historyEarlier records checked as of October 20, 2026, with additional overseas records checked on October 21, 2026.
Status in the previously checked recordsRe-examination amendment and written response accepted for filing on August 26, 2026, after a decision of refusal.

The title in the procedural record emphasizes conductivity at room temperature and atmospheric pressure. The formula and manufacturing methods discussed here come from the Korean publication and the related international publication. [1, 2]

The published formula is AaBb(EO4)cXd. A and B each represent a group of possible metallic elements, EO4 is an oxygen-containing group, and X is an additional constituent. The formula allows for many combinations. The examples describe the samples the applicant reports making. [1, 2]

2. Manufacturing Methods and the Re-examination Record

How the Ceramic Is Made and Tested

The publications describe two routes. Deposition forms material on a substrate. The solid-state route describes reacting lanarkite with copper phosphide to synthesize the ceramic. [1, 2]

Elemental analysis shows which elements are present, while crystal-structure analysis shows how they are arranged. Some starting materials can form separate compounds, and the phases present can change as the material cools after heat treatment. It matters whether the sample tested for electrical behavior has the same structure as the sample used for crystal analysis.

The applicant interprets its magnetic and electrical measurements as evidence of superconductivity. Establishing a continuous zero-resistance path through a sample calls for evidence beyond a low resistance reading or a signal that changes with temperature. [1, 2]

Sample dimensions matter when comparing electrical results. The measured resistance of a thin film depends on its thickness, and measurements on a bulk sample also depend on its length and cross-sectional area. Resistivity accounts for those dimensions and makes comparisons between materials easier.

I’d look at what happens when the starting-material ratio or a processing condition changes slightly. Varying one factor at a time across several batches could help show which conditions drive the result.

Re-examination Timeline

  • August 16, 2023 — Examination requested.
  • January 19, 2024 — Notice of reasons for refusal issued.
  • February 26, 2024 — Written response submitted.
  • July 19, 2024 — Specification amended.
  • January 20, 2025 — Final notice of reasons for refusal issued.
  • January 22, 2025 — Amendment and written response submitted.
  • July 11, 2025 — Notice of reasons for refusal issued.
  • March 11, 2026 — Amendment and written response submitted.
  • June 25, 2026 — Decision of refusal dispatched.
  • August 26, 2026 — Re-examination amendment and written response accepted for filing. [3]

3. Possible Applications and What to Test

I’d start by testing small conductive components or coatings against existing materials. Samples with the same length and cross-sectional area would make resistance easier to compare. I’d also measure contact resistance and check how much heat builds up during use.

A wire would need to carry current reliably along its full length, withstand repeated bending and make a low-resistance connection to other metals. A proposed superconducting use would also need to specify the operating temperature, magnetic field and current limit. I’d look for independent replication and consistent results across batches before judging how practical the material could be.

Manufacturing cost depends on how much of each batch can actually be used. If only part of the reaction product meets the target, the usable yield can be much lower than the total output. Separation, grinding and handling rejected material all add to the cost.

References

  1. International publication WO2023027536A1
  2. Korean publication KR20230030551A
  3. Korean Patent-ro procedural record for application 10-2022-0106812

Comments

Popular posts from this blog

LK-99, Part 8: Patents and Applications

Superconductivity, Part 3: How Flux Pinning Works

Superconductivity, Part 1: The 1911 Discovery